{"product_id":"1302ba-bendpak-automatic-pipe-bender-package","title":"1302BA BendPak Automatic Pipe Bender Package","description":"\u003cdiv class=\"kd-main-product-feature-container\"\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-continer kd-flex-row-2\"\u003e \u003cdiv class=\"kd-prouduct-feature-item kd-prouduct-feature-content\"\u003e \u003ch2\u003eBending is one job. Swaging and expanding are two more — and the 1302BA does all three\u003c\/h2\u003e \u003cp\u003eShops that buy a pipe bender usually discover the same thing in the first month: the bend was never the whole job. An exhaust section that has been bent still has to be sized at the ends so it slips into the next component and clamps up without leaking. On a lot of machines that means a second piece of equipment, a second footprint and a second setup. This 1302BA package puts the finishing operations on the back of the same machine.\u003c\/p\u003e \u003cp\u003eTwo separate end-finishing units sit at the rear for flaring and expanding, alongside a high-speed clampless swager and an internal expander. The drop-in collar means moving from a bend to a swage is a change of position rather than a change of machine, and the swager box is open-sided so tools go in and come out without being fought into place.\u003c\/p\u003e \u003ch3\u003eWhy end-finishing on the same frame matters more than it sounds\u003c\/h3\u003e \u003cp\u003eThe argument is not that it saves buying a second machine, although it does. It is that a pipe only has to be handled once. Every time a part is carried between machines and re-clamped it is a chance to mark it, bend it slightly out of true, or set it up a degree off. Doing the bend and both ends on one frame, with the tooling laid out in trays at the machine, keeps the part in one pair of hands from raw tube to finished section.\u003c\/p\u003e \u003ch3\u003eThe frame is what you are actually paying for\u003c\/h3\u003e \u003cp\u003eUnder the tooling this is a hydraulic press with a purpose. The top cylinder develops up to 60,000 lbs. (27,216 kg) of force, and the structure that has to absorb that is a welded steel tube frame in 6\" x 6\" section with 3\/8\" wall. That matters because a frame that twists under load does not bend pipe badly — it bends pipe inconsistently, which is worse, because the first article passes and the tenth does not.\u003c\/p\u003e \u003cp\u003eThe cylinder stem passes right through the primary frame rather than being cantilevered off it, the barrel is one piece so the bending gates stay aligned with the ram, and the bending heads and tooling mounts are ground to within .002\". Cylinders are commercial-grade with chrome-moly shafts conforming to ANSI 92.2 — a material and manufacturing standard for the shafts themselves, not a safety listing for the machine, and worth reading as exactly that. A 5 HP motor drives a direct-drive 4 gpm pump; a canister filter, a large reservoir, oil sight gauges and 1\/2\" oversized high-pressure hose exist to keep the oil clean and cool, which is the single biggest determinant of how long a hydraulic system lasts.\u003c\/p\u003e \u003ch3\u003eWhat it will bend\u003c\/h3\u003e \u003cp\u003eTube capacity is 3\" (76 mm) outside diameter at up to .095 wall. Bending radius runs from 3.3\" (89 mm) at the tightest to 5\" (127 mm) at the widest, so both a close radius around an obstruction and a long sweeping curve are available from the same machine. The standard 302 die pack covers 1.5\", 1.625\", 1.75\", 2\", 2.25\" and 2.5\". A 180° bending die is offered separately for genuine U-bends.\u003c\/p\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMax. tube capacity\u003c\/th\u003e \u003ctd\u003e3\" (76 mm), .095 wall\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eBending radius range\u003c\/th\u003e \u003ctd\u003e3.3\" (89 mm) to 5\" (127 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eTop cylinder force\u003c\/th\u003e \u003ctd\u003e60,000 lbs. (27,216 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eStandard die pack\u003c\/th\u003e \u003ctd\u003e1.5\", 1.625\", 1.75\", 2\", 2.25\", 2.5\" (302)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eFrame\u003c\/th\u003e \u003ctd\u003eWelded steel tube, 6\" x 6\" x 3\/8\"\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003ePerfect for\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExhaust shops building custom systems rather than fitting pre-made ones.\u003c\/li\u003e \u003cli\u003eGeneral fabrication shops handling tubing alongside their other work.\u003c\/li\u003e \u003cli\u003eRoll cage, chassis and race preparation builders.\u003c\/li\u003e \u003cli\u003eAgricultural, marine and industrial repair operations that make their own pipework.\u003c\/li\u003e \u003cli\u003eAny shop currently sending tube work out and waiting on it.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat is in the package\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eThe 1302BA digital automatic bender with its enclosed programmable control.\u003c\/li\u003e \u003cli\u003eTooling to standard 302 die sizes, with quick-release bending and finishing dies and twist-lock mounting.\u003c\/li\u003e \u003cli\u003eTwo rear end-finishing units, a clampless swager, an internal expander and the drop-in collar.\u003c\/li\u003e \u003cli\u003eIntegrated power-relief control valve, pressure gauges, a NEMA-rated switch box with overload relays, industrial casters and tool trays.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eConfirm the electrical supply before you order\u003c\/h3\u003e \u003cp\u003ePublished figures for the electrical supply differ. The product heading and the specification table both give the motor as 5 HP at 208-230 VAC, 60 Hz, single phase; the short search description published with this listing gives a three-phase build at the other mains frequency. \u003cstrong\u003eConfirm the electrical configuration with us in writing before you order\u003c\/strong\u003e, and tell us what supply you have available in the bay — we will get the current figure straight from BendPak and state it on the order. A bender delivered on the wrong supply is an expensive object standing still while an electrician is found.\u003c\/p\u003e \u003cp\u003eOne smaller point in the same table: the dimensions block prints the label \"Depth\" twice, against 64\" (1,626 mm) and again against 26\" (660 mm). The 26\" figure is one of the machine's three principal dimensions, but the table does not say which axis it belongs to, so we have not assigned it one. If you are planning the footprint to the inch, ask and we will confirm it from the manufacturer's specification sheet.\u003c\/p\u003e \u003ch3\u003eGetting it into the shop\u003c\/h3\u003e \u003cp\u003eThe machine occupies roughly 41\" (1,041 mm) by 64\" (1,626 mm) on the floor with the third dimension noted above, and it rolls on industrial casters once it is down — but it weighs 1,388 lbs. and ships crated at 48\" x 70\" x 30\" (1,219 mm x 1,778 mm x 762 mm). Plan the route in: door widths, thresholds, any step, and whether the floor between the dock and the machine's final position will take that weight on castors. Allow working room at the rear as well as the front, because the end-finishing units are used from behind the machine.\u003c\/p\u003e \u003ch3\u003eShipping and delivery\u003c\/h3\u003e \u003cp\u003eThis item ships free within the lower 48 states, so there is nothing to add at checkout. Unloading is the receiver's responsibility: a forklift rated for the crate, or collection from the carrier's terminal, which many buyers prefer because the terminal has the equipment on hand. A residential delivery address carries a residential fee, applied at checkout when it is selected.\u003c\/p\u003e \u003cp\u003eInspect the crate before signing. Look for impact damage to the crate, bent tooling, damaged gauges or control housings and any sign of hydraulic oil. Write what you find on the bill of lading with the driver present and photograph it — once you sign clean, the carrier's record says the machine arrived perfect.\u003c\/p\u003e \u003ch3\u003eWarranty\u003c\/h3\u003e \u003cp\u003eBendPak publishes a written warranty document covering its equipment and we hold the current copy; ask for it before ordering if the terms matter to you. A hydraulic machine warning worth repeating: if something fails, raise the claim before anything is opened. Dismantling a cylinder, the pump or the control enclosure ahead of a claim is normally treated as modification and cover generally does not survive it. Photograph the fault, note the serial number, and call us first.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-feature-container\"\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-container kd-flex-row-2\"\u003e \u003cdiv class=\"kd-product-feature-item kd-product-feature-content\"\u003e \u003ch2\u003eBendPak Automatic Pipe Bender 1302BA With Metric Tooling Package - 208-230V \/ 60Hz \/ 1 Phase\u003c\/h2\u003e \u003cp data-start=\"335\" data-end=\"954\"\u003eThe BendPak 1302BA digital automatic pipe bender package brings precision, versatility, and power to fabrication shops that demand repeatable performance and full control over complex bending tasks. With this machine, operators gain the ability to program exact bend angles and save presets, making it ideal for jobs requiring consistency across multiple parts. The digital control system lets technicians enter desired values, monitor live die angle feedback, and toggle between automatic or manual bending modes. This flexibility ensures both high volume production and custom one-off jobs can be handled effectively.\u003c\/p\u003e \u003cp data-start=\"956\" data-end=\"1666\"\u003eThe Bendpak pipe bender package includes the automatic bender itself along with a set of tooling compatible with standard 302 die sizes. The standard tooling enables bending of common exhaust and tubing applications without needing immediate upgrades. The BendPak 1302BA’s frame is constructed from rigid 6-inch by 6-inch by 3⁄8-inch welded steel tubing, engineered for torsional strength and long service. Hydraulics drive the bending and finishing operations using commercial-grade cylinders, all featuring chrome-moly shafts built to ANSI 92.2 standards. The bending heads and tooling mounts undergo precise grinding, held to within .002 inches of tolerance, reducing runout and ensuring accurate bends across repeated cycles.\u003c\/p\u003e \u003cp data-start=\"1668\" data-end=\"2354\"\u003eTube capacity for the 1302BA Bendpak pipe bender package reaches up to 3 inches in diameter with wall thickness up to .095 inch, making it suitable for heavy exhaust tubing, structural tubing, and a variety of workshop jobs. The machine achieves its bending using a top cylinder that produces up to 60,000 pounds of force, ensuring that even tougher tubing resists yield or kinking during bends. The bending radius range spans from a minimum of approximately 3.3 inches to a maximum of 5 inches, giving a balance between tight bends and smooth curvature. To support end-finishing operations, the package includes two rear end-finishing units for flaring and expanding tubing ends without needing separate machines.\u003c\/p\u003e \u003cp data-start=\"2356\" data-end=\"3023\"\u003eQuick change tooling is a key feature of the 1302BA. Twist-lock tooling and quick-release dies allow faster die swaps and shorter setup times. A clampless swager and internal expander are also integrated, enabling internal diameter expansion or outside flaring operations using the same machine. The drop-in collar design simplifies swaging operations, letting the shop swiftly move from bending to finishing modes without disassembling tooling. The hydraulic system is protected by an integrated power-relief control valve that prevents overpressure, and the system also features pressure gauges for real-time monitoring of hydraulic pressures during bending cycles.\u003c\/p\u003e \u003cp data-start=\"3025\" data-end=\"3610\"\u003eDimensions of the Bendpak unit are roughly forty-one inches wide by sixty-four inches deep by twenty-six inches tall, with a shipping weight of around 1,388 lbs. The machine may ship crated at about 48 × 70 × 30 inches in size. Because of its mass, handling equipment such as a forklift is necessary for installation. The hydraulic system includes a large oil reservoir, canister oil filter, and oversight of clean fluid flow to mitigate contamination and maintain consistent performance. Oversized hoses and an oil sight gauge help with maintenance and system diagnostics during extended use.\u003c\/p\u003e \u003cp data-start=\"3612\" data-end=\"4214\"\u003e\u003ca href=\"https:\/\/mechanicsuperstore.com\/pages\/contact\" title=\"\" rel=\"noopener\" target=\"_blank\"\u003eContact us \u003c\/a\u003efor more Bendpak products or pipe bender information.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-details-container\"\u003e \u003ch4 class=\"h3 accordion\"\u003eBendpak 1302BA Product Features\u003c\/h4\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-container kd-flex-row-2\"\u003e \u003cdiv class=\"kd-product-feature-item kd-product-feature-content\"\u003e \u003cul\u003e \u003cli\u003e2 separate end-finishing units at rear for all necessary flaring and expanding\u003c\/li\u003e \u003cli\u003eComes complete with quick release bending and finishing dies\u003c\/li\u003e \u003cli\u003eIncludes high-speed clampless swager and internal expander\u003c\/li\u003e \u003cli\u003eEasy-to-use drop-in collar makes swaging operations quick and efficient\u003c\/li\u003e \u003cli\u003eTwist-lock tooling\u003c\/li\u003e \u003cli\u003eIntegrated power-relief control valve\u003c\/li\u003e \u003cli\u003ePass-through cylinder stem passes completely through the primary frame\u003c\/li\u003e \u003cli\u003eRigid 6\" x 6\" x 3\/8\" welded-steel tube frame\u003c\/li\u003e \u003cli\u003eCommercial-grade hydraulic cylinders\u003c\/li\u003e \u003cli\u003eAll cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards\u003c\/li\u003e \u003cli\u003eQuick-release bending dies for reduced set-up times\u003c\/li\u003e \u003cli\u003eBending heads precision grounded to within .002\"\u003c\/li\u003e \u003cli\u003eEnclosed controls keep your bending area clutter-free\u003c\/li\u003e \u003cli\u003e2.5\" oversized barrel shafts for maximum dependability and minimum maintenance\u003c\/li\u003e \u003cli\u003eStandard grease fittings allow for simple lubrication\u003c\/li\u003e \u003cli\u003eNEMA-rated on\/off switch box with overload relays\u003c\/li\u003e \u003cli\u003ePressure gauges monitor system pressures\u003c\/li\u003e \u003cli\u003eIndustrial grade casters for mobility\u003c\/li\u003e \u003cli\u003eAdjustable pressure valve located up front\u003c\/li\u003e \u003cli\u003eOne-piece barrel keeps bending gates aligned\u003c\/li\u003e \u003cli\u003eHeat-treated tooling for extended service life\u003c\/li\u003e \u003cli\u003eConvenient tool trays for organization\u003c\/li\u003e \u003cli\u003e5 HP energy efficient motor\u003c\/li\u003e \u003cli\u003eDirect-drive, high-speed 4 GPM pump\u003c\/li\u003e \u003cli\u003eSingle enclosed bottom cylinder applies even pressure\u003c\/li\u003e \u003cli\u003eLarge fluid reservoir for cooler oil and less contamination\u003c\/li\u003e \u003cli\u003eCanister oil filter keeps hydraulic oil clean\u003c\/li\u003e \u003cli\u003eOil sight gauges for visual inspection\u003c\/li\u003e \u003cli\u003eOversized 1\/2\" high-pressure hose improves cooling\u003c\/li\u003e \u003cli\u003eOpen-sided swager box for easier tool access\u003c\/li\u003e \u003cli\u003e180° bending die available\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-spec-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003eProduct Specifications\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-spec-container kd-flex-row\"\u003e \u003cdiv class=\"kd-product-spec-item\"\u003e \u003ch4\u003eOverview\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eBending Controls\u003c\/td\u003e \u003ctd align=\"right\"\u003eAutomatic \/ Digital\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eExpander Controls\u003c\/td\u003e \u003ctd align=\"right\"\u003eManual\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFrame Style\u003c\/td\u003e \u003ctd align=\"right\"\u003eDouble-Ended Expander\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMax. Tube Capacity\u003c\/td\u003e \u003ctd align=\"right\"\u003e3\" (76 mm) .095 wall\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4\u003eBending\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eMax. Bending Radius\u003c\/td\u003e \u003ctd align=\"right\"\u003e5\" (127 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMin. Bending Radius\u003c\/td\u003e \u003ctd align=\"right\"\u003e3.3\" (89 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4\u003eHydraulics\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eTop Cylinder Force\u003c\/td\u003e \u003ctd align=\"right\"\u003e60,000 lbs. (27,216 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHydraulic Filter\u003c\/td\u003e \u003ctd align=\"right\"\u003eCanister\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMotor\u003c\/td\u003e \u003ctd align=\"right\"\u003e5 HP \/ 208-230 VAC \/ 60 Hz \/ 1 PH\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4\u003eDie Pack\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eStandard\u003c\/td\u003e \u003ctd align=\"right\"\u003e1.5\", 1.75\", 1.625\", 2\", 2.25\", 2.5\" (302)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4\u003eDimensions\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eWidth\u003c\/td\u003e \u003ctd align=\"right\"\u003e41\" (1,041 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDepth\u003c\/td\u003e \u003ctd align=\"right\"\u003e64\" (1,626 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eHeight\u003c\/td\u003e \u003ctd align=\"right\"\u003e26\" (660 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4\u003eShipping\u003c\/h4\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eWeight\u003c\/td\u003e \u003ctd align=\"right\"\u003e1,388 lbs.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions\u003c\/td\u003e \u003ctd align=\"right\"\u003e48\" x 70\" x 30\" (1,219 mm x 1,778 mm x 762 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-pickupdelivry-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003ePick Up and Delivery\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-pickupdelivry-container kd-flex-row\"\u003e \u003cdiv class=\"kd-product-pickupdelivry-item\"\u003e \u003cp\u003eOur Pick Up locations for BendPak are located in Santa Paula, California \u0026amp; Theodore, Alabama.\u003c\/p\u003e \u003cp\u003eCall, text, or chat with us if you have questions. 866-774-7743\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\"\u003e\u003c\/div\u003e \u003cdiv class=\"kd-main-product-downloads-container\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"BendPak","offers":[{"title":"Default Title","offer_id":49287123009690,"sku":"5115127","price":9866.5,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/coretarps.co.uk\/products\/1302ba-bendpak-automatic-pipe-bender-package","provider":"My Store","version":"1.0","type":"link"}