Restore Your 8-pn 5500 Tsurumi Pump to Full Pumping Capacity

The Aquascape 8-pn 5500 Impeller is a factory-specification replacement impeller for the Tsurumi 8-pn 5500 external pond pump. As the primary flow-generating component, the impeller is the most wear-critical part in any centrifugal pump; replacing it with an OEM-specification part returns the pump to its rated output without the cost and lead time of full pump replacement.

OEM Impeller for Professional-Grade Pump Performance

The Tsurumi 8-pn 5500 is a professional external pump used in demanding large-pond and water-feature applications. Its impeller is engineered to tight tolerances that directly affect pumping efficiency. Third-party aftermarket impellers often fail to match these tolerances, resulting in reduced flow or increased power draw. Using this Aquascape OEM impeller ensures the pump returns to original specification.

How to Use

Shut down and unplug the pump. Disconnect the inlet and outlet plumbing connections. Remove the pump casing bolts to access the impeller chamber. Hold the impeller shaft with a strap wrench and unthread the impeller following the correct rotation direction indicated in the Tsurumi 8-pn 5500 service manual. Fit the replacement impeller, hand-tighten and secure to specification. Reassemble the pump, reconnect plumbing, and verify normal operation before returning to service. Inspect the mechanical seal during impeller replacement and replace it at the same time if showing wear.

Ideal for pond professionals and facility managers servicing Tsurumi 8-pn 5500 pumps on large koi ponds, professional pondless installations, and commercial water features.