Complete Medium Water Garden Kit With Adjustable Flow Waterfall Pump

The Aquascape Medium Pond Kit (11 ft x 16 ft / 3.4 m x 4.9 m liner) includes everything needed to build a finished water garden up to approximately 2,000 gal (7,600 L), with the AquaSurge 2000-4000 adjustable flow waterfall pump at the heart of the system. The AquaSurge 2000-4000 lets you dial flow from 2,000 to 4,000 GPH (7,570 to 15,140 LPH) so the waterfall height and volume can be tuned after installation without swapping the pump.

Everything in One Box, No Separate Sourcing Required

Aquascape engineers the kit components to work as a matched system. The skimmer, biological filter, liner, underlayment, and pump are all sized for each other, so there is no guesswork about whether the skimmer flow rate matches the pump or whether the liner provides adequate coverage for the specified pond footprint. This removes the most common source of error for first-time pond builders.

How to Use

Review the Aquascape construction guide included in the kit before excavating. Mark the pond outline and dig the basin with a shallow shelf around the perimeter for marginal plants. Install the skimmer on the end opposite the planned waterfall. Lay underlayment, then liner, draping evenly with enough overhang to tuck under the edge stones. Connect the pump to the BioFalls filter and secure flex pipe connections. Fill slowly and adjust liner position before trimming and edging. Apply water conditioner on first fill and allow the biological filter to cycle for four to six weeks before fully stocking fish.

Ideal for homeowners and first-time pond builders installing a medium backyard water garden with koi or goldfish, where a matched-component system eliminates sizing guesswork.