{"product_id":"atlas-tc221-tire-changer-wb11-wheel-balancer-economy-combo-package","title":"Atlas TC221 Tire Changer + WB11 Wheel Balancer Economy Combo Package","description":"\u003cdiv class=\"divider\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" alt=\"\" width=\"1198\" height=\"8\"\u003e\u003c\/div\u003e \u003cdiv id=\"kd-main-product-feature-container\" class=\"kd-main-product-feature-container\"\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-feature-continer kd-flex-row-2\"\u003e \u003cdiv class=\"kd-prouduct-feature-item kd-prouduct-feature-content\"\u003e \u003ch2\u003eAtlas TC221 Tire Changer + WB11 Wheel Balancer Economy Combo Package\u003c\/h2\u003e  \u003cp\u003eThe useful thing about this pairing is that the two machines share one ceiling. The TC221 changer and the WB11 balancer are both rated to a \u003cstrong\u003e39\" maximum tire diameter\u003c\/strong\u003e, so nothing you can mount on the changer arrives at the balancer too big to spin. Combinations assembled from whatever was on the shelf routinely mismatch there, and it only shows up on the day a customer brings in the one wheel that defeats half your bay.\u003c\/p\u003e  \u003cp\u003eThis is the entry pairing in the Atlas range: the TC221 rim-clamp swing-arm changer and the WB11 computer-controlled spin balancer, both running from a standard \u003cstrong\u003e110volt\u003c\/strong\u003e outlet, both CE approved, both covered for \u003cstrong\u003e1 year, parts only\u003c\/strong\u003e. It is aimed squarely at the shop or the home workshop that is buying its first proper tire machines rather than replacing worn ones.\u003c\/p\u003e  \u003ch3\u003eWill It Fit? Start With the Air, Not the Floor\u003c\/h3\u003e  \u003cp\u003eNeither machine needs bolting down and neither needs anything unusual electrically, so siting them is easy. The thing that catches buyers out is compressed air.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eThe TC221 requires an external air supply, and it is not included.\u003c\/strong\u003e The clamping jaws and the bead breaker are both air-operated. Without a compressor the changer will not clamp a wheel, let alone break a bead — the electric turntable is only half the machine.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eAir requirement is 90 to 110 PSI, and must not exceed 140 PSI.\u003c\/strong\u003e A small hobby compressor can reach that but often cannot sustain it through repeated cycles. If you are buying air at the same time, size it for continuous duty rather than peak pressure.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePower: 110volt for both machines.\u003c\/strong\u003e Ordinary single-phase outlets. No electrician, no three-phase, no dedicated supply.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eThe WB11 needs no anchor-down installation.\u003c\/strong\u003e It is not bolted to the slab, so it can be positioned now and repositioned later.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFloor space and access are the customer's responsibility.\u003c\/strong\u003e Measure the doorway and the route in, and leave working room on the swing-arm side of the changer.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eThe Matched Envelope, in Plain Numbers\u003c\/h3\u003e  \u003cp\u003eBoth machines stop at the same \u003cstrong\u003e39\"\u003c\/strong\u003e tire diameter. Around that shared limit:\u003c\/p\u003e  \u003cp\u003eThe changer takes a wheel up to \u003cstrong\u003e13\"\u003c\/strong\u003e wide at the bead breaker, with adjustable jaws that relocate to three mounting positions along the turntable slide. Set them for the wheels you actually run: a rim clamped in the middle of a jaw's travel is held far more securely than one clamped at the very end of its range.\u003c\/p\u003e  \u003cp\u003eThe balancer takes rims from \u003cstrong\u003e10\"\u003c\/strong\u003e to \u003cstrong\u003e32\"\u003c\/strong\u003e in diameter and \u003cstrong\u003e1 1\/2\"\u003c\/strong\u003e to \u003cstrong\u003e20\"\u003c\/strong\u003e wide, on a \u003cstrong\u003e40mm\u003c\/strong\u003e shaft, up to a maximum wheel weight of \u003cstrong\u003e150 lbs\u003c\/strong\u003e. That range is wider than the changer's, so the balancer is not the limiting half — useful if you later add a larger changer alongside it.\u003c\/p\u003e  \u003ch3\u003eWhere the Word \"Economy\" Actually Shows\u003c\/h3\u003e  \u003cp\u003eWorth knowing before you order. On the WB11, \u003cstrong\u003eall dimensions are entered manually\u003c\/strong\u003e. You measure the rim's offset, diameter and width and key the three figures into the machine yourself; there is no automatic data-entry gauge that reads them off the wheel for you, as there is on the automatic balancers further up the range.\u003c\/p\u003e  \u003cp\u003eThat costs time and consistency, not accuracy. The machine still measures to 1 gram, resolves weight position to \u003cstrong\u003e1.4 degrees\u003c\/strong\u003e and spins at \u003cstrong\u003e150 RPM\u003c\/strong\u003e. But the calculation is only as good as the three numbers you typed in, so a mis-measured offset produces a confidently wrong answer, and on a busy day the measuring adds up. For a handful of wheels a day it is a non-issue; for a dedicated tire bay it is the one reason to look at an automatic-entry machine instead, and we will point you at one.\u003c\/p\u003e  \u003cp\u003eNothing else is stripped out: the WB11 is self-diagnosing and self-calibrating, starts and stops as the hood is lowered and raised, has automatic and pedal-operated brakes, offers static and dynamic modes plus rapid optimization (OPT), and displays in grams or ounces and millimetres or inches.\u003c\/p\u003e  \u003ch3\u003eThe Changer's Force Figures, and What They Mean\u003c\/h3\u003e  \u003cp\u003eTwo numbers do the real work. The bead breaker develops \u003cstrong\u003e5,500 LB of force\u003c\/strong\u003e and the turntable produces \u003cstrong\u003e885 ft\/lbs\u003c\/strong\u003e of rotating torque from a \u003cstrong\u003e1 HP\u003c\/strong\u003e motor. Bead breaking is a shear job — parting a bead pressed against the rim flange for years — and turntable torque is what carries a stiff sidewall around the mount\/demount head without stalling.\u003c\/p\u003e  \u003cp\u003eRim protection is a metal mount\/demount head taking either a metal roller or replaceable plastic inserts, large plastic jaw covers, and a plastic cover for the bead breaker shovel. The plastic is meant to be sacrificed instead of the customer's alloy, and spare inserts are included so you are not waiting on an order the first time one wears through.\u003c\/p\u003e  \u003ch3\u003ePerfect For\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eThe home workshop\u003c\/strong\u003e that has grown past paying for mounting and balancing and has, or will buy, a compressor.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eSmall commercial shops\u003c\/strong\u003e doing tires alongside general service rather than as the main trade.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eATV and motorcycle dealers\u003c\/strong\u003e, where wheels are small and the shared 39\" ceiling is never the constraint.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eA second bay or an overflow set\u003c\/strong\u003e in a shop that already runs larger machines.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eNot\u003c\/strong\u003e a dedicated high-volume tire bay — see the manual data-entry note above before you commit.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eWhat's in the Box\u003c\/h3\u003e  \u003cp\u003e\u003cstrong\u003eWith the TC221 changer:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eColumn-mounted inflator box with gauge\u003c\/li\u003e \u003cli\u003eFilter \/ regulator \/ lubricator\u003c\/li\u003e \u003cli\u003e20\" tire tool\u003c\/li\u003e \u003cli\u003eLube bucket with brush\u003c\/li\u003e \u003cli\u003eSet of large plastic jaw covers\u003c\/li\u003e \u003cli\u003ePlastic cover for the bead breaker shovel\u003c\/li\u003e \u003cli\u003eMultiple replacement plastic inserts for the mount\/demount head\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eWith the WB11 balancer:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePlastic quick-release nut\u003c\/li\u003e \u003cli\u003e4 centering cones\u003c\/li\u003e \u003cli\u003eWheel weight pliers\u003c\/li\u003e \u003cli\u003eMeasuring calipers\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eThe Two Machines Side by Side\u003c\/h3\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003e \u003c\/th\u003e \u003cth scope=\"col\"\u003eTC221 changer\u003c\/th\u003e \u003cth scope=\"col\"\u003eWB11 balancer\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMaximum tire diameter\u003c\/th\u003e \u003ctd\u003e39\"\u003c\/td\u003e \u003ctd\u003e39\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMotor\u003c\/th\u003e \u003ctd\u003e1 HP turntable\u003c\/td\u003e \u003ctd\u003e1\/4 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003ePower supply\u003c\/th\u003e \u003ctd\u003e110volt\u003c\/td\u003e \u003ctd\u003e110volt\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAir required\u003c\/th\u003e \u003ctd\u003e90 to 110 PSI, external supply\u003c\/td\u003e \u003ctd\u003enone\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAnchoring\u003c\/th\u003e \u003ctd\u003eper the manual\u003c\/td\u003e \u003ctd\u003enone required\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eShipping weight\u003c\/th\u003e \u003ctd\u003e500 lbs\u003c\/td\u003e \u003ctd\u003e355 lbs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e \u003ctd\u003e1 year, parts only\u003c\/td\u003e \u003ctd\u003e1 year, parts only\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ch3\u003eCertification, Stated Plainly\u003c\/h3\u003e  \u003cp\u003eBoth machines are CE approved. It is worth being precise about what that is and is not, because the wording gets used loosely in this trade.\u003c\/p\u003e  \u003cp\u003eA European conformity marking is the manufacturer's own declaration that a product meets the relevant European directives. It is a real statement and it is \u003cstrong\u003enot\u003c\/strong\u003e the same document as a North American third-party safety listing, where an independent laboratory tests the design against a published standard and audits the plant building it. Atlas publishes no such listing for these two machines and we will not imply otherwise.\u003c\/p\u003e  \u003cp\u003eFor most tire-equipment buyers this never comes up. It can with an insurer, a landlord, or a fleet contract specifying listed shop equipment across the board. \u003cstrong\u003eIf you have that requirement, check it before you order\u003c\/strong\u003e and ask us — we will send whatever the manufacturer publishes.\u003c\/p\u003e  \u003ch3\u003eShipping and Delivery\u003c\/h3\u003e  \u003cp\u003eThis package ships by freight carrier within the lower 48 as two separate machines, weighing \u003cstrong\u003e500 lbs\u003c\/strong\u003e and \u003cstrong\u003e355 lbs\u003c\/strong\u003e. Freight is quoted live at checkout for your actual address rather than as a flat national figure.\u003c\/p\u003e  \u003cp\u003eDelivery is curbside and getting the machines off the truck is the buyer's responsibility. Neither is a two-person lift. Arrange a forklift, a dock, or a pallet jack and a ramp before delivery day, or choose terminal pickup. A home address rather than a commercial one carries a residential fee.\u003c\/p\u003e  \u003cp\u003eLook the pallets over before you sign. Photograph any damage, write it onto the bill of lading while the driver is present, and keep your copy. A signature with no note on it is very hard to argue with afterwards.\u003c\/p\u003e  \u003ch3\u003eWarranty\u003c\/h3\u003e  \u003cp\u003eBoth carry \u003cstrong\u003e1 year parts-only coverage\u003c\/strong\u003e: parts supplied, labour yours.\u003c\/p\u003e  \u003cp\u003eBefore concluding anything is faulty on the balancer, run its self-diagnosis and self-calibration routines — a machine that has been moved, knocked or set on an uneven floor will often just need recalibrating. On the changer, check your air pressure and the filter\/regulator\/lubricator first: weak or wet air behaves exactly like a failing cylinder.\u003c\/p\u003e  \u003cp\u003eIf it is a genuine fault, \u003cstrong\u003eleave the machine assembled.\u003c\/strong\u003e Photograph it, note what you were doing when it happened, and call before anything is stripped down. A part that arrives already dismantled has lost the evidence the claim rests on.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" alt=\"\" width=\"1198\" height=\"8\"\u003e\u003c\/div\u003e \u003cdiv id=\"kd-main-product-details-container\" class=\"kd-main-product-details-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003eProduct Features\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-details-continer kd-flex-row\"\u003e \u003cdiv class=\"kd-prouduct-details-item\"\u003e \u003ch4 class=\"h3\"\u003eTC221 Tire Changer\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRim Clamp\/Swing Arm Tire Changer\u003c\/li\u003e \u003cli\u003eAir operated jaws \u0026amp; bead breaker (external air supply required)\u003c\/li\u003e \u003cli\u003eElectric turntable\u003c\/li\u003e \u003cli\u003eAdjustable jaws, three mounting positions\u003c\/li\u003e \u003cli\u003eMetal mount\/demount head w\/ metal roller or replaceable plastic inserts\u003c\/li\u003e \u003cli\u003eColumn mounted inflator box w\/ gauge Included\u003c\/li\u003e \u003cli\u003eFilter\/Regulator\/Lubricator Included\u003c\/li\u003e \u003cli\u003e20″ Tire Tool Included\u003c\/li\u003e \u003cli\u003eLube Bucket with Brush Included\u003c\/li\u003e \u003cli\u003eSet of Large Plastic Jaw Covers Included\u003c\/li\u003e \u003cli\u003ePlastic Cover for Bead Breaker Shovel Included\u003c\/li\u003e \u003cli\u003eMultiple Replacement Plastic Inserts for M\/D Head Included\u003c\/li\u003e \u003c\/ul\u003e \u003ch4 class=\"h3\"\u003eWB11 Wheel Balancer\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComputer Controlled Motorized Spin Balancer\u003c\/li\u003e \u003cli\u003eAutomatic and pedal operated brake.\u003c\/li\u003e \u003cli\u003eAutomatic start\/stop when hood is lowered\/raised.\u003c\/li\u003e \u003cli\u003eStatic and dynamic balancing modes.\u003c\/li\u003e \u003cli\u003eRapid optimization (OPT)\u003c\/li\u003e \u003cli\u003eSelf-Diagnosing and Self-calibrating\u003c\/li\u003e \u003cli\u003eExceptional stability in reading the unbalance between planes.\u003c\/li\u003e \u003cli\u003eDisplay in grams or ounces, and in mm or inches.\u003c\/li\u003e \u003cli\u003eNo anchor-down installation needed\u003c\/li\u003e \u003cli\u003eIncludes Plastic Quick-Release Nut, 4 Centering Cones, Wheel Weight Pliers, \u0026amp; Measuring Calipers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" alt=\"\" width=\"1198\" height=\"8\"\u003e\u003c\/div\u003e \u003cdiv id=\"kd-main-product-spec-container\" class=\"kd-main-product-spec-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003eProduct Specifications\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-spec-continer kd-flex-row\"\u003e \u003cdiv class=\"kd-prouduct-spec-item\"\u003e \u003ch4 class=\"h3\"\u003eAtlas® TC221 Specifications\u003c\/h4\u003e \u003ctable border=\"0\" cellspacing=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eRims\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003eSteel, Aluminum, Alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eExternal Locking Rim Dimensions (3 Positions)\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1. 9 3\/4\" - 21 5\/8\" 2. 10 3\/4\" - 22 1\/2\" 3. 11 5\/8\" - 23 1\/4\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eInternal Locking Rim Dimensions (3 Positions)\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1. 11 5\/8\" - 23 1\/4\" 2. 12 5\/8\" - 24 1\/4\" 3. 13 1\/2\" - 25 1\/4\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMaximum Tire Diameter\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e39\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMaximum Wheel Width (Bead Breaker)\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e13\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eTable Motor\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eTurntable Rotating Torque\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e885 ft\/lbs.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eBead Breaker\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e5,500 LB. Force\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eAir Requirement\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e90-110 PSI (MUST NOT EXCEED 140 PSI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eOperating Voltage\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e110volt\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eShipping Weight\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e500 lbs.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch4 class=\"h3\"\u003e\u003c\/h4\u003e \u003ch4 class=\"h3\"\u003eAtlas® WB11 Specifications\u003c\/h4\u003e \u003ctable border=\"0\" cellspacing=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMax Tire Diameter\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e39\" (3\" 6')\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eRim Sizes (Cars And Light Trucks)\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e10\"-32\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eRim Width\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1 1\/2\"-20\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eShaft Size\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e40mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMax. Wheel Weight\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e150 lbs.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eBalancing Speed\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e150 RPM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eData Entry\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003eAll Dimensions Manual Entry\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMeasurements\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003eStandard Or Metric\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eAccuracy\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1 gram\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eWeight Position Resolution\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1.4 Degrees\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eSelf Calibration\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eMotor\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e1\/4 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003ePower Supply\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e110volt\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd align=\"left\" width=\"50%\"\u003eShipping Weight\u003c\/td\u003e \u003ctd align=\"right\" width=\"50%\"\u003e355 lbs.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" alt=\"\" width=\"1198\" height=\"8\"\u003e\u003c\/div\u003e \u003cdiv id=\"kd-main-product-pickupdelivry-container\" class=\"kd-main-product-pickupdelivry-container\"\u003e \u003ch3 class=\"h3 accordion\"\u003ePick Up and Delivery\u003c\/h3\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-pickupdelivry-continer kd-flex-row\"\u003e \u003cdiv class=\"kd-prouduct-pickupdelivry-item\"\u003e \u003cp\u003eOur Pick Up locations for Atlas are located in Altanta, GA, Fresno, CA, Phoenix, AZ, Indiana, IN, and New Jersey, NJ.\u003cbr\u003e\u003cbr\u003eCall, text, or chat with us if you have questions. - 866-774-7743\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kd-prouduct-pickupdelivry-item\"\u003e\u003cbr\u003e\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"divider\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-ew8kwapfc4\/images\/stencil\/original\/image-manager\/golden-bar.png?t=1681903157\" alt=\"\" width=\"1198\" height=\"8\"\u003e\u003c\/div\u003e \u003cdiv id=\"kd-main-product-downloads-container\" class=\"kd-main-product-downloads-container\"\u003e \u003cdiv class=\"panel\"\u003e \u003cdiv class=\"kd-product-downloads-continer kd-flex-row\"\u003e \u003cdiv class=\"kd-prouduct-downloads-item\"\u003e\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":49287152828570,"sku":"ATETCWB-COMBOEC","price":2379.3,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/coretarps.co.uk\/products\/atlas-tc221-tire-changer-wb11-wheel-balancer-economy-combo-package","provider":"My Store","version":"1.0","type":"link"}