{"product_id":"bendpak-vmp-7580v-603-air-compressor","title":"BendPak Air Compressor VMP-7580V V Max Patriot 7.5 HP 80 Gallon Vertical Made in USA","description":"\u003ch2\u003eBendPak V-Max Patriot 7580V-603: the compressor that drains itself\u003c\/h2\u003e \u003cp\u003eAsk any shop what actually killed their last air system and the answer is water, not wear. Condensate sits in the bottom of a tank, rusts it from the inside, carries down the line and ruins spray work, air tools and blast media. Every compressor comes with a drain valve. Almost nobody opens it often enough.\u003c\/p\u003e \u003cp\u003eThe 7580V-603 is specified with an \u003cstrong\u003eelectronic drain valve\u003c\/strong\u003e fitted from the factory, so tank draining happens on a timer rather than on somebody's memory. Combine that with the built-in intercooler and the air-cooled after-cooler, which condense moisture out before it ever reaches the tank, and you have a machine designed around the failure mode that ends most compressors early.\u003c\/p\u003e \u003cp\u003eUnderneath that it is a straightforward heavy-duty machine: 7.5 HP, 3-Phase, a two-stage four-cylinder pump cast in 100% iron, feeding an 80-Gallon vertical tank, rated 26 CFM at 175 PSI.\u003c\/p\u003e  \u003ch3\u003eThe moisture problem, and the three things this machine does about it\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBetween the stages.\u003c\/strong\u003e Air leaving the first cylinder is hot. The intercooler drops its temperature before the second cylinder compresses it again. Cooler air holds less water vapour, so moisture starts falling out of suspension before the air is anywhere near the tank.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAfter the pump.\u003c\/strong\u003e The air-cooled after-cooler takes another bite out of the discharge temperature. This is the stage that decides how much water arrives at your tank rather than at your air tools, and it is the reason a two-stage machine with an after-cooler delivers noticeably drier air than a single-stage unit of similar output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAt the bottom of the tank.\u003c\/strong\u003e Whatever still condenses gets removed automatically by the electronic drain instead of accumulating until somebody notices. That is the part you would otherwise have to build into a maintenance routine and then actually follow.\u003c\/p\u003e \u003cp\u003eNone of this replaces a refrigerated dryer if you are spraying finish coats. It does mean the compressor itself is not the thing corroding.\u003c\/p\u003e  \u003ch3\u003eWill It Fit?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eThree-phase only.\u003c\/strong\u003e The 7580V-603 is a 3-Phase machine on 208-230V service at 60 Hz. There is no single-phase mode. If your building is single-phase, the single-phase version of this compressor exists and is the one to order.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCircuit size.\u003c\/strong\u003e BendPak's recommendation for this model is a 50 Amp breaker. Give that to your electrician along with the run length; conductor sizing is their call, not ours.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eStarter.\u003c\/strong\u003e A magnetic starter is specified as fitted, which means thermal overload protection is part of the machine rather than something the installer adds.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFloor.\u003c\/strong\u003e Vertical tank, 880 lbs. (399 kg). Plan how it gets from the truck to its final position and how it is stood upright; that is the awkward part of a vertical compressor delivery, not the weight.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eAir around it.\u003c\/strong\u003e The pump is air-cooled and finned. Leave clearance for airflow and for reaching the valves from above.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSiting, ventilation, the electrical supply and permits are the customer's responsibility. We will check any published figure against the factory documentation before you order if you ask.\u003c\/p\u003e  \u003ch3\u003eSlow pump, long life\u003c\/h3\u003e \u003cp\u003eThe motor turns at 1,750 RPM. The pump, driven through dual belts, turns at 625 RPM. Running the pump at roughly a third of motor speed is what produces the 78 dB rating and, more importantly, means each component sees a fraction of the cycles per hour that a direct-drive machine racks up for the same volume of air. Dual belts also share the load, which keeps tension per belt low and takes stress off the pump bearings.\u003c\/p\u003e \u003cp\u003eThe pump is a \"V-4\" finned-cylinder arrangement giving 360° cooling, with heavy-duty disc valves that can be reached without removing a cylinder head or breaking into the compressor piping. Cast iron cylinders and heads hold their shape under sustained heat, where aluminium blocks with pressed-in sleeves distort. Tapered roller main bearings support the crankshaft across its full length and needle-type piston pin bearings spread the load at the small end.\u003c\/p\u003e  \u003ch3\u003ePerfect For\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eBody and paint shops.\u003c\/strong\u003e The moisture story above is the entire reason.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eBusy multi-bay service shops.\u003c\/strong\u003e Continuous duty cycle, cast iron, ASME tank.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eManufacturing and fleet maintenance.\u003c\/strong\u003e Three-phase service is normally already there.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eShops with a floor plan problem.\u003c\/strong\u003e The vertical 80-Gallon tank buys back floor area against a horizontal machine of the same volume.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eWhat's in the Box\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-stage 100% cast iron \"V-4\" pump with built-in intercooler and air-cooled after-cooler\u003c\/li\u003e \u003cli\u003e80-Gallon vertical ASME-rated tank with an ASME-rated safety valve\u003c\/li\u003e \u003cli\u003eElectronic drain valve\u003c\/li\u003e \u003cli\u003eMagnetic starter\u003c\/li\u003e \u003cli\u003eSet of four half-inch anti-vibration pads\u003c\/li\u003e \u003cli\u003eFully-enclosed belt guard and dual drive belts\u003c\/li\u003e \u003cli\u003eAutomatic pressure switch and integrated pressure unloader valves\u003c\/li\u003e \u003cli\u003ePressure gauge with service valve, oil sight glass\u003c\/li\u003e \u003cli\u003eOversize replaceable air filters\u003c\/li\u003e \u003cli\u003e3\/4\" tank outlet fitting\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAn air dryer is not included and is not fitted.\u003c\/p\u003e  \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMotor horsepower\u003c\/th\u003e \u003ctd\u003e7.5 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eAir delivery\u003c\/th\u003e \u003ctd\u003e26 CFM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMaximum pressure\u003c\/th\u003e \u003ctd\u003e175 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eMotor speed\u003c\/th\u003e \u003ctd\u003e1,750 RPM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003ePump speed\u003c\/th\u003e \u003ctd\u003e625 RPM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003ePump\u003c\/th\u003e \u003ctd\u003eTwo-stage, \"V-4\", solid cast iron, belt drive\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e \u003ctd\u003eContinuous\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e \u003ctd\u003e78 dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eVoltage \/ phase \/ frequency\u003c\/th\u003e \u003ctd\u003e208-230V, 3-Phase, 60 Hz\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eRecommended breaker\u003c\/th\u003e \u003ctd\u003e50 Amp\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eTank\u003c\/th\u003e \u003ctd\u003e80-Gallon, vertical, ASME rated\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eTank outlet\u003c\/th\u003e \u003ctd\u003e3\/4\" fitting\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eShipping weight\u003c\/th\u003e \u003ctd\u003e880 lbs. (399 kg)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ch3\u003eThree things to confirm before you order\u003c\/h3\u003e \u003cp\u003ePublished figures for this compressor differ in three places. Each one is set out below with the source it came from, so you can see straight away whether it affects your installation.\u003c\/p\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eOverall dimensions\u003c\/th\u003e \u003ctd\u003eThe spec sheet carries two sets. One reads 45\" by 1,016 mm by 1,981 mm, with 1,143 mm on the long side. A separate listing on the same sheet reads 610 mm, 1,829 mm and 864 mm — and labels two of those three rows \"Depth\", which is plainly a transcription error. \u003cstrong\u003eIf the footprint decides whether this machine fits, ask us in writing and we will confirm it with the factory before you order.\u003c\/strong\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eLubrication system\u003c\/th\u003e \u003ctd\u003eThe feature copy on this page describes splash lubrication. The product's own specification field records full pressure lubrication. Those are different systems with different service implications. \u003cstrong\u003eIf that matters to your maintenance planning, ask us to confirm it in writing.\u003c\/strong\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth scope=\"row\"\u003eCountry of origin\u003c\/th\u003e \u003ctd\u003eBendPak's own text for this machine says \"Assembled in USA\". The product title on this page says \"Made in USA\". Those are not identical claims — assembly in the USA does not by itself establish where each component was made. \u003cstrong\u003eIf country of origin decides your purchase, ask us in writing and we will confirm it with BendPak before you order.\u003c\/strong\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ch3\u003eCertification\u003c\/h3\u003e \u003cp\u003eThe manufacturer's specification for this model states certification to UL, CSA and ASME. In practice the ASME stamp is the one your inspector or insurer will ask about, because it governs the pressure vessel and the safety valve — the parts holding 175 PSI. We can supply the certification paperwork on request rather than leaving you with a claim on a web page.\u003c\/p\u003e  \u003ch3\u003ePick up and delivery\u003c\/h3\u003e \u003cp\u003eBendPak pick-up is listed at Santa Paula, California and Theodore, Alabama. Stock location moves, so confirm a collection with us before you drive: call, text or chat on 866-774-7743.\u003c\/p\u003e \u003cp\u003eThis item ships free within the lower 48 states, so there is nothing to add at checkout. You are responsible for getting it off the truck — forklift, dock, or terminal pickup arranged with the carrier. Residential delivery carries an extra fee and it is shown to you at checkout. Check the crate over before signing anything, and write any damage on the bill of lading at the moment of delivery. After a clean signature, a freight claim is an uphill argument.\u003c\/p\u003e  \u003ch3\u003eWarranty\u003c\/h3\u003e \u003cp\u003eBendPak's warranty is published as its own document, linked on this page, rather than as a term inside this product's data — so no length is quoted here. Whatever it says, protect the claim the same way: photograph the fault, leave the assembly together, and speak to us before anything is opened up. A component taken apart before assessment is usually a component that is no longer covered.\u003c\/p\u003e","brand":"BelAire Compressors","offers":[{"title":"Default Title","offer_id":49287159709850,"sku":"5179113","price":3986.5,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/coretarps.co.uk\/products\/bendpak-vmp-7580v-603-air-compressor","provider":"My Store","version":"1.0","type":"link"}