Get peak performance from your skimmer with the official Reef Octopus auto neck cleaner!

Octopus motorized (ANC) Automated Neck Cleaner helps keeps your octopus protein skimmer running at peak performance by periodically wiping the inside of the neck where all the bio-organics usually would accumulate. This great skimmer accessory not only keeps you skimmer running at peak efficiency but save the timely chore of keeping your skimmers neck clean. As you know, build up in the neck causes foam to stick to the sides and restricting the collection of skimmate within the skimmers cup.

Keeping the neck wall clean results in consistent skimmer performance and little to no downtime. This device uses twin squeegees to automatically remove the buildup from a skimmer neck. The (ANC) Lid consists of a high torque low RPM motor, wiper mount, lid with mounting clamps, and the squeegees. To operate this easy to you device, you simply plug the unit into a timer (not included) or aquarium controller and set it to run for a few minutes 4 to 6 times per day. By running it this way you will never experience crud build up along the walls of your skimmers neck. This will eliminate the daily chore of cleaning for two or more weeks while maintaining the level of skimmate production that you would normally get with only a freshly-washed collection cup.

IMPORTANT: This item is NOT ozone-safe.

Performance Enhancing Accessory

• Twin Blades
• Prevents the Buildup Within the Skimmer Neck
• Automatic*
• Solid Construction
• Sealed Accessible Drive Motor

* use of a timer necessary

Available for the following Reef Octopus Skimmers

Octopus Cleaner 110 fits: SRO-1000int, XP-1000int, XP-1000ext, NWB-110, DNW-110, Classic 110(int/ext)

Octopus Cleaner 150 fits: SRO-2000int, NWB-150, DNWB-150, Classic 150(int/ext), Classic 150sss, Classic 152-S, DCS150int, POV1, Prime 150int, Elite 150(int/sss), Regal 150(int/sss)

Octopus Cleaner XP1000 fits: XP-1000sss

Octopus Cleaner 170 fits: XP-2000INT, SRO-2000ext, DIABLO DCS-170int, Regal 170(int, sss, ext)

Octopus Cleaner 200 fits: SRO3000(int/ext), XP2000(sss/ext), NWB/DNWB200, Classic 225INT, Classic 200(int/ext), Classic 202-S, XS200, XS225, EXT200, DCS-2000(int/ext), POV2, Prime 200int, Elite 200(int/sss), Regal 200(int, sss, ext), Hurricone Cat 1

Octopus Cleaner 220 fits: XP3000int, XP3000ext, XP3000sss, SRO3000sss, POV3, Elite 220int/sss, Regal 220int/sss.

Octopus Cleaner 250 fits: SRO5000(int/ext/sss), NWB/DNWB250, XP5000(int/ext/sss), XS250, EXT250 , EXT300, EXT350, DCS 250, DCSR 250ext, Regal 250(int, sss, ext), Hurricone Cat 2(int/ext)

Octopus Cleaner 300 fits: SRO6000ext, SRO6000sss, TDNW300, CAT3, XS350, DCS 300, DCSR 300ext, Regal 300(int/sss/ext)

Octopus Cleaner XP8000 fits: XP8000(int/ext)

Available for the following IceCap K2 Skimmers

K2-120: Octopus Cleaner 110
K2-200: Octopus Cleaner 200

This unit will increase the height of your skimmer by approximately 4.75“. Our Octopus ANC does not require you to send in or modify your stock lid in any way because our ANC is built into the lid for precise control.

Neptunes APEX Code for Neck Cleaner Operation: This will operate the cleaner for 15 seconds out of every 6 hours, continuously.

[Cleaner]
Fallback OFF
OSC 000/00:15/359:45 Then ON