{"product_id":"quincy-353d80vca23m-air-compressor","title":"Quincy Air Compressor 5 HP 80 Gallon Two Stage","description":"\u003ch2\u003eQuincy 553D80VCA23M 5 HP 80-Gallon Two-Stage Air Compressor, 230V 3-Phase\u003c\/h2\u003e  \u003cp\u003eAsk anyone who repairs shop compressors what fails first and you will not hear \"the motor\". You will hear valves. In a reciprocating pump the reed valves open and close on every single stroke, which over a working life is a number with a lot of zeros on it, and the way a reed normally dies is fatigue at the root after being bent too far, too often. This machine answers that directly: \u003cstrong\u003estainless steel reed valves fitted with valve bumpers\u003c\/strong\u003e, so the reed is physically stopped before it over-travels.\u003c\/p\u003e  \u003cp\u003eAround that sits a two-stage cast-iron pump with aluminium heads, belt driven at 942 RPM, on a vertical 80-gallon receiver, with a fin-and-tube intercooler, a mounted air-cooled aftercooler, graphite gaskets and a magnetic starter. It is wound for 230V, 3-phase supply.\u003c\/p\u003e  \u003ch3\u003eWhat a valve bumper actually does\u003c\/h3\u003e  \u003cp\u003eA reed valve is a thin spring-steel flap. Air pressure lifts it off its seat to let the charge through, and it springs back to close. The forces that lift it do not care about the reed’s fatigue limit, so at high flow the reed can be pushed past the curvature it was designed for. Do that a few million times and it cracks where it is clamped — not where it looks stressed.\u003c\/p\u003e  \u003cp\u003eA bumper is a stop that sets the maximum lift. The reed opens as far as it needs to and no further, so the bending stress at the root stays inside the design envelope for the whole service life instead of only at moderate flow. Making the reed itself from stainless steel is the other half of the answer: valves live in hot, wet, oil-laden air, and corrosion pitting is a stress raiser that starts the same crack from the other direction.\u003c\/p\u003e  \u003cp\u003eGraphite cylinder and head gaskets belong to the same part of the machine and the same argument. They hold the joint across the temperature swings that two-stage compression produces without relaxing, which is what keeps the valve plate clamped evenly — an unevenly clamped plate is one that lets a reed seat crooked.\u003c\/p\u003e  \u003ch3\u003eTwo stages, and heat taken out twice\u003c\/h3\u003e  \u003cp\u003eThe low-pressure cylinder makes the first compression, the high-efficiency fin-and-tube intercooler removes the heat that compression created, and the high-pressure cylinder finishes the job on cooler, denser air. Maximum rated pressure is 175 PSI. Doing it in two steps with cooling in between is less work than doing it in one, and it keeps the discharge temperature down, which is what the valves and the oil actually care about.\u003c\/p\u003e  \u003cp\u003eAfter the pump, a mounted air-cooled aftercooler cools the discharge again before the air enters the tank. That is what makes water condense inside the receiver where it can be drained, instead of downstream in the pipework and the tools.\u003c\/p\u003e  \u003ch3\u003eWill It Fit?\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eFootprint:\u003c\/strong\u003e 37\" by 24\", plus access room on the pump side.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eHeight:\u003c\/strong\u003e 74\" overall, with clearance above for pump removal at service time.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWeight:\u003c\/strong\u003e 690 lbs dry, carried high on a narrow vertical base. Level slab, anchored down.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eSupply:\u003c\/strong\u003e 230V, 3-phase. Set at the factory by the motor and starter, and not changeable on site.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCircuit:\u003c\/strong\u003e sized by a certified electrician. We do not publish a breaker figure for this model, because the honest answer depends on the cable run and the code where you are.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eConnection:\u003c\/strong\u003e 3\/4\" tank outlet into a header that slopes away from the machine.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003ePreparing the site is the buyer’s responsibility:\u003c\/strong\u003e verifying that 230V three-phase service is genuinely available where the machine will stand, that the slab will carry the load and take anchors, that the room is ventilated, and that the electrical work is permitted and inspected where your jurisdiction requires it.\u003c\/p\u003e  \u003ch3\u003ePerfect For\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eBusy service shops\u003c\/strong\u003e that cycle their compressor hard all day and want the wear items specified properly.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFabrication and metalwork\u003c\/strong\u003e, where hot, humid discharge air is the normal operating condition.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eBuyers on their second compressor\u003c\/strong\u003e, who have already replaced a valve plate once and would rather not again.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eBuildings on 230V three-phase\u003c\/strong\u003e, the most common commercial three-phase supply.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eWhat is in the Box\u003c\/h3\u003e  \u003cp\u003eVertical 80-gallon receiver, two-stage cast-iron pump with aluminium heads, 5 HP industrial motor, magnetic starter with thermal overload protection, stainless steel reed valves with valve bumpers, graphite cylinder and head gaskets, high-efficiency fin-and-tube intercooler, mounted air-cooled aftercooler, spin-on oil filter and oil sight glass. No air dryer is included. The EWK-4 Maintenance Kit that unlocks the extended warranty is a separate purchase made at the time of order.\u003c\/p\u003e  \u003ch3\u003eSpecifications\u003c\/h3\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eRated power\u003c\/th\u003e \u003ctd\u003e5 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePump speed\u003c\/th\u003e \u003ctd\u003e942 RPM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eSupply\u003c\/th\u003e \u003ctd\u003e230V, 3-phase, electric\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eStarter\u003c\/th\u003e \u003ctd\u003eMagnetic, thermal overload protected\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eValves\u003c\/th\u003e \u003ctd\u003eStainless steel reed, with valve bumpers\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eGaskets\u003c\/th\u003e \u003ctd\u003eGraphite, cylinder and head\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCompression\u003c\/th\u003e \u003ctd\u003eTwo-stage, belt drive\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCylinders and heads\u003c\/th\u003e \u003ctd\u003eCast iron with aluminium heads\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eOil filter\u003c\/th\u003e \u003ctd\u003eSpin-on\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eMaximum pressure\u003c\/th\u003e \u003ctd\u003e175 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCooling\u003c\/th\u003e \u003ctd\u003eFin-and-tube intercooler, mounted air-cooled aftercooler\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eRated pump life\u003c\/th\u003e \u003ctd\u003eOver 60,000 hours\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eReceiver\u003c\/th\u003e \u003ctd\u003e80 gallons, vertical\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eTank outlet\u003c\/th\u003e \u003ctd\u003e3\/4\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eLength by width\u003c\/th\u003e \u003ctd\u003e37\" by 24\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eHeight\u003c\/th\u003e \u003ctd\u003e74\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eWeight\u003c\/th\u003e \u003ctd\u003e690 lbs\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003cp\u003e\u003cem\u003eDelivered air volume and running current are absent from that table on purpose. Our catalogue records both as bare numbers with no unit against them, and we will read you the manufacturer’s published figures rather than restate something we cannot evidence.\u003c\/em\u003e\u003c\/p\u003e  \u003ch3\u003eCertification, stated plainly\u003c\/h3\u003e  \u003cp\u003eThe receiver is built to the North American pressure-vessel code and the machine carries a CSA mark. Our supplier record also references a North American third-party electrical listing, which we are not printing because the entry is not clean enough to stand behind. If your insurer, your plant safety programme or your local inspector requires a named listing mark, ask us and we will confirm what appears on the data plate before you order.\u003c\/p\u003e  \u003ch3\u003eTwo details worth a phone call\u003c\/h3\u003e  \u003cp\u003ePublished information about this build differs on two points, and both are set out here in full. On lubrication, the manufacturer’s feature list describes a fully pressure-lubricated package with a gerotor positive-displacement oil pump; the structured specification field on this page records the oil system as splash lubricated. On the tank drain, the feature list and the detailed specification block both record an electronic automatic tank drain, while a summary field records none. If either point decides your purchase, \u003cstrong\u003eask us to check the as-shipped configuration before you commit\u003c\/strong\u003e — we will get it confirmed with Quincy.\u003c\/p\u003e  \u003ch3\u003eShipping and delivery\u003c\/h3\u003e  \u003cp\u003eFreight only, within the lower 48 states, crated on a skid. Arrange a forklift or a dock before delivery day, because the carrier brings it to the truck and stops there. Terminal pickup is available if collecting it yourself is easier.\u003c\/p\u003e  \u003cp\u003eA residential delivery address carries a residential fee — let us know at order time if the address has no commercial receiving.\u003c\/p\u003e  \u003cp\u003eInspect the freight before the driver leaves. Photograph the crate, look at the skid and the sheet metal, and write any damage on the bill of lading before signing. Once it is signed clean, a claim becomes very hard to pursue.\u003c\/p\u003e  \u003ch3\u003eWarranty\u003c\/h3\u003e  \u003cp\u003eQuincy provides a 1-year factory warranty for consumer and commercial use. It extends to the 3-year \"No Bull\" warranty, covering on-site service and labour, when the EWK-4 Maintenance Kit is bought at the time of purchase and the unit is registered with the manufacturer.\u003c\/p\u003e  \u003cp\u003eOne rule on warranty work, and it decides more claims than anything else: \u003cstrong\u003ecall before you take anything apart.\u003c\/strong\u003e An opened pump cannot be diagnosed after the event, and pre-emptive disassembly is the most common reason a genuine claim is refused.\u003c\/p\u003e","brand":"Quincy Compressor","offers":[{"title":"Default Title","offer_id":49287158038682,"sku":"2020040742","price":4357.5,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/coretarps.co.uk\/products\/quincy-353d80vca23m-air-compressor","provider":"My Store","version":"1.0","type":"link"}