{"product_id":"quincy-80gallon-air-compressor","title":"Quincy Air Compressor 80 Gallon","description":"\u003ch2\u003eQuincy 551C80VCB23M 5 HP 80-Gallon Two-Stage Air Compressor, 230V Single Phase\u003c\/h2\u003e  \u003cp\u003eAlmost every serious two-stage shop compressor assumes you have three-phase power. Most independent workshops, home garages and rural buildings do not, and the usual answer — a rotary phase converter, or a service upgrade the utility quotes in weeks — costs more than the compressor. This machine is the way around that. It is a genuine two-stage, cast-iron, 80-gallon industrial compressor that runs on \u003cstrong\u003e230V single-phase\u003c\/strong\u003e service, and it is the only unit in this group that does.\u003c\/p\u003e  \u003cp\u003eIt is also the only one for which Quincy publishes an actual circuit size rather than referring you to an electrician: a \u003cstrong\u003e60-amp breaker\u003c\/strong\u003e. That single number is worth more at the planning stage than most of the spec sheet, because it tells you immediately whether your existing panel can take the machine or whether the quote needs to include a sub-panel.\u003c\/p\u003e  \u003ch3\u003eA pump that turns slowly\u003c\/h3\u003e  \u003cp\u003eThe motor runs at 942 RPM. Set that against the industrial motors on the larger machines in this range, which turn at nearly twice the speed, and the design intent is obvious: this pump is geared to run slowly for the same duty. Slow-turning pumps see lower piston speeds, lower ring and bore wear per hour of running, and lower noise, which is the difference between a compressor you can hold a conversation next to and one you cannot. Quincy rates the pump for more than 60,000 hours.\u003c\/p\u003e  \u003cp\u003eThe pump body is cast iron with aluminium heads — iron where the wear happens and the mass helps absorb heat, aluminium on top where shedding heat matters more. Drive is by belt rather than direct coupling, so the pump turns slower than the motor and the crankshaft is isolated from motor shock loads.\u003c\/p\u003e  \u003ch3\u003eTwo stages, cooled twice\u003c\/h3\u003e  \u003cp\u003eCompression happens in two steps. The low-pressure cylinder takes the first bite, the high-efficiency fin-and-tube intercooler removes the heat that first compression just created, and the high-pressure cylinder finishes the job. Maximum rated pressure is 175 PSI.\u003c\/p\u003e  \u003cp\u003eDownstream of the pump a mounted air-cooled aftercooler takes the discharge temperature down again before the air enters the receiver. Cooling the air at that point is what makes its moisture condense in the tank, where there is a drain to deal with it, rather than in the pipework and the tools, where there is not. Graphite cylinder and head gaskets hold the seals at those pressures and temperatures.\u003c\/p\u003e  \u003ch3\u003eWill It Fit?\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eCircuit:\u003c\/strong\u003e 230V single-phase on a 60-amp breaker. Check the spare capacity in your panel against that figure before you order — it is the number that decides whether this is a simple installation or an electrical project.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFootprint:\u003c\/strong\u003e 37\" by 24\". A vertical package, so it wants a corner rather than a wall run.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eHeight:\u003c\/strong\u003e 74\" overall, and you want clearance above that for pump service.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWeight:\u003c\/strong\u003e 680 lbs dry, sitting high on a narrow base. Level slab, and anchor it.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePlumbing:\u003c\/strong\u003e the tank outlet is 3\/4\". Slope the header away from the machine and take drops off the top.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eRoute:\u003c\/strong\u003e measure the doorways. The crate, not the machine, is the dimension that has to fit.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eSite preparation is the buyer’s responsibility.\u003c\/strong\u003e Confirming the available supply and spare panel capacity, the slab and anchor points, room ventilation, and the permitting and inspection of the electrical work are all yours and your electrician’s. Ask us anything before you order; we would rather answer questions than process a return.\u003c\/p\u003e  \u003ch3\u003ePerfect For\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eHome and hobby shops with a 230V single-phase supply\u003c\/strong\u003e that need real two-stage capacity without a service upgrade.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eIndependent repair shops in older buildings\u003c\/strong\u003e where three-phase was never brought in.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFarm and ranch workshops\u003c\/strong\u003e on a rural single-phase feed.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eRestoration and fabrication work\u003c\/strong\u003e where a large receiver and steady pressure matter more than raw output.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eWhat is in the Box\u003c\/h3\u003e  \u003cp\u003eThe complete package: vertical 80-gallon receiver, two-stage cast-iron pump with aluminium heads, 5 HP industrial motor, magnetic starter with thermal overload protection, high-efficiency fin-and-tube intercooler, mounted air-cooled aftercooler, spin-on oil filter, stainless steel reed valves with valve bumpers, graphite cylinder and head gaskets and an oil sight glass. No air dryer is supplied. The EWK-4 Maintenance Kit that unlocks the extended warranty is a separate purchase, made at the same time as the machine.\u003c\/p\u003e  \u003ch3\u003eSpecifications\u003c\/h3\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eRated power\u003c\/th\u003e \u003ctd\u003e5 HP\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePump speed\u003c\/th\u003e \u003ctd\u003e942 RPM\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eSupply\u003c\/th\u003e \u003ctd\u003e230V, single phase, electric\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eRecommended breaker\u003c\/th\u003e \u003ctd\u003e60 amp\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eStarter\u003c\/th\u003e \u003ctd\u003eMagnetic, thermal overload protected\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eCompression\u003c\/th\u003e \u003ctd\u003eTwo-stage, belt drive\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePump material\u003c\/th\u003e \u003ctd\u003eCast iron with aluminium heads\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eValves\u003c\/th\u003e \u003ctd\u003eStainless steel reed valves with valve bumpers\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eGaskets\u003c\/th\u003e \u003ctd\u003eGraphite cylinder and head gaskets\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eMaximum pressure\u003c\/th\u003e \u003ctd\u003e175 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCooling\u003c\/th\u003e \u003ctd\u003eFin-and-tube intercooler plus mounted air-cooled aftercooler\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eRated pump life\u003c\/th\u003e \u003ctd\u003eMore than 60,000 hours\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eReceiver\u003c\/th\u003e \u003ctd\u003e80 gallons, vertical\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eTank outlet\u003c\/th\u003e \u003ctd\u003e3\/4\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eLength\u003c\/th\u003e \u003ctd\u003e37\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eWidth\u003c\/th\u003e \u003ctd\u003e24\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eHeight\u003c\/th\u003e \u003ctd\u003e74\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eWeight\u003c\/th\u003e \u003ctd\u003e680 lbs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eAir dryer\u003c\/th\u003e \u003ctd\u003eNot supplied\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003cp\u003e\u003cem\u003eDelivered air volume is not in that table on purpose: the figure published for this unit arrives without the unit of measure it belongs to. Ask us and we will read you the manufacturer’s published value before you order.\u003c\/em\u003e\u003c\/p\u003e  \u003ch3\u003eCertification, stated plainly\u003c\/h3\u003e  \u003cp\u003eThe receiver is built to the North American pressure-vessel code and the machine carries a CSA mark. Our supplier data also references a North American third-party electrical listing, which we are not printing because the record is not clean enough for us to stand behind it. If your insurer or your local inspector requires a named listing mark, ask us before you order and we will confirm what is on the data plate.\u003c\/p\u003e  \u003ch3\u003eConfirm the lubrication and the drain with us first\u003c\/h3\u003e  \u003cp\u003ePublished information for this package differs on two points. Each figure is attributed to its source below.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e \u003cstrong\u003eLubrication.\u003c\/strong\u003e The manufacturer’s feature list describes this as a fully pressure-lubricated package with a gerotor positive-displacement oil pump, while the structured specification field on this page records the oil system as splash lubricated. Those describe two genuinely different designs, so each source is quoted here rather than one being picked for you. \u003cstrong\u003eIf pressure lubrication is the reason you are choosing this model, confirm it with us before ordering\u003c\/strong\u003e and we will check it against the shipping configuration.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eTank drain.\u003c\/strong\u003e The same split appears on the drain: the feature list and the detailed specification block both record an electronic automatic tank drain, while one summary field records none. \u003cstrong\u003eIf a fitted automatic drain is a requirement rather than a preference, ask us before you order\u003c\/strong\u003e and we will confirm it.\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3\u003eShipping and delivery\u003c\/h3\u003e  \u003cp\u003eFreight only, to the lower 48 states, crated on a skid. This is not a parcel and it will not come on a van: arrange a forklift or a dock, because the carrier delivers to the truck and no further. Terminal pickup is available and is often the easiest route for a home or small shop without loading equipment.\u003c\/p\u003e  \u003cp\u003eA delivery to a residential address carries a residential fee. Tell us at order time if that is where it is going, so the quote is right the first time.\u003c\/p\u003e  \u003cp\u003eInspect the crate before the driver leaves. Photograph anything that looks wrong — a split skid, a leaning load, dented sheet metal — and write it on the bill of lading before you sign. A clean signature is the carrier’s evidence that nothing arrived damaged.\u003c\/p\u003e  \u003ch3\u003eWarranty\u003c\/h3\u003e  \u003cp\u003eQuincy covers the machine with a 1-year factory warranty on both consumer and commercial use. Buying the EWK-4 Maintenance Kit at the same time as the compressor extends that to the 3-year \"No Bull\" warranty, which includes on-site service and labour rather than parts alone, and the unit has to be registered with the manufacturer for the extension to stand.\u003c\/p\u003e  \u003cp\u003eThe one warning we give on every compressor we sell: \u003cstrong\u003ecall us before you take anything apart.\u003c\/strong\u003e An opened pump can no longer be diagnosed, and disassembly ahead of a claim is the most common reason a genuine claim is refused.\u003c\/p\u003e","brand":"Quincy Compressor","offers":[{"title":"Default Title","offer_id":49287158169754,"sku":"2020040741","price":4732.0,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/coretarps.co.uk\/products\/quincy-80gallon-air-compressor","provider":"My Store","version":"1.0","type":"link"}