SPECIFICATION

• Temperature range: temperature from minus 50℃to 110℃
• Resolution: temperature 0.1℃
• Measurement accuracy:  ±0.1℃
• Control precision:0.1℃
• Frequency refresh: 0.8 S
• Input  voltage:AC110-240V(chance)
• Measuring input: DS18B20 Waterproof  type  sensor   
• Output: relay 10A one channel
• Environments  requirement:temperature  from  minus   10℃ to 60℃, humidity from 20% to 85%
• Product size:144mm(long)*99mm(wide)*44mm(high)

INSTRUCTION

Start lights: The equipment is Start to work when the Status light is light on.
Stop lights: The equipment is stop working when the Status light extinguish
Status indicator light will blink frequently and buzzer alarm when the measured temperature is greater than 110℃ or measured temperature is less than -50℃

Button instruction:
Start: set the temperature to start
Stop: set the temperature to stop

Setting   instruction:
1.Refrigeration  Mode:

 2. Heating  Mode :
The Heating equipment will start to work if the start temperature of set is less than  stop and the temperature of testing is small or equal to beginning. If the testing temperature greater than or equal to stop temperature, the Heating equipment will stop to work.
For example: Set the starting temperature is 15℃, Stop temperature is 20℃. Heating equipment start to work meanwhile the red indicator light is light. When the detected temperature value is less than or equal to 15℃. Heating equipment stop to  work meanwhile the red indicator light extinguish. When the detected temperature value is more than 20℃.  
3. Temperature correction mode:
The system set temperature correction for positive and negative 9 degrees. The  temperature calibration can be carried out if feel the temperature measurement is  not accuracy or have a higher levels of thermometer.

Operation method:
1: Power off. 2: Hold down the Stop- button. 3: Power on.
At this time to enter the setting correction temperature and the "measured temperature word" sample disappeared, "Measured temperature" digital scintillation. Press "Start+" and " Start-" to adjust the correction temperature. The automatic return to normal state for 10 seconds and  the "measured temperature" appeared. Under normal condition showing the temperature be equal to measured temperature A plus correction temperature B.
For example: Correction temperature B = -0.5℃, Actual measured temperature A= 25℃, Then showing the  temperature  is  24.5℃

Applications:

• In the aspect of raising pets, the product can be applied to fish tank, aquarium and crawler box etc.
• In  terms of farming, the product can be applied to incubation and brood, temperature rise and keep  , ventilation and heat dissipation, temperature detection and warning etc.
• In agriculture, the product can be applied to strain culture fermented, seedling culture, green house, cultivation and management of flowers and edible fungi etc.
• In the aspect of intelligent home, the product can be applied to floor heating, water heating, heater,  electrothermal membrane, electrothermal bed, electric blanket and electric fan etc.
• In terms of food, the product can be applied to make wine, fermented glutinous rice wine, flour fermentation , bean sprouts are cultivated , yogurt production, preservation of fruits and vegetables etc.
• In industry, the product is can be applied to temperature control cabinet, oven of experiment and warehouse monitor etc.

WHAT'S IN THE PACKAGE

• 1 x SainSmart RC200A Digital Temperature Controller Thermostat
• 1 x English manual