The Following Postcodes Will Incur Additional Delivery Costs. AB. BT. CA. DD. DG. DH. EH. FK. G. GY. HS. IM. IV. JE. KA. KW. KY. ML. NE. PA. PH. PO30 to PO41. SR. TD. TS. ZE. LA6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 18. 19. 20. 21. 22 & 23. Please Contact Us Before Placing An Order If Ordering To These Postcodes.

The Slotted Fence Post Foot is a strong galvanised Jakpost® accessory designed to allow a standard intermediate slotted Jakpost® to be installed securely onto a hard surface such as concrete. It provides a practical solution where traditional post installation is not suitable, while keeping most of the bracket and fixings concealed once compatible fence panels are installed into the post slots.

The galvanised foot is supplied complete with screws for attaching it securely to the standard slotted Jakpost®. It is designed specifically for standard intermediate posts and should not be used with heavy duty slotted Jakposts®.

When using the Slotted Jakpost® foot, the post may need to be cut to the required length. The cut-down post should be treated with Jakcure® cut treatment, with the cut end positioned at the top of the post. The gravel board may also need to be slightly notched around the baseplate and treated with Jakcure® cut treatment so that it can sit flush with the ground.

The product is intended to make certain installations easier and can save installation time; however, every site and application is unique and suitability should be assessed for the specific installation. The choice of appropriate fixings and the structural integrity of the surface remain the responsibility of the installer, as installation performance may be affected by factors such as wind loads, weathering and external forces.

Key Features

• Strong galvanised Jakpost® foot
• Designed for standard intermediate slotted Jakpost® posts
• Suitable for secure hard surfaces such as concrete
• Not suitable for heavy duty slotted Jakposts®
• Supplied with screws to attach the foot to the post
• Most bracket and fixings are concealed once fence panels are installed
• Baseplate dimensions: 130mm wide x 120mm deep
• Legs: 300mm high x 50mm wide
• Baseplate holes: 10mm diameter for M8 studding
• Post may need to be cut to length for installation
• Cut end should be treated with Jakcure® cut treatment and positioned at the top
• Gravel board may require slight notching around the baseplate
• Gravel board cut area should be treated with Jakcure® cut treatment
• Suitable for standard intermediate posts only
• Handcrafted in Kent by experienced timber experts